stainless steel manual operation wall type penstock gate

Brief introduction

The penstock gate is widely used in the pipe mouth where the medium is water (raw water, clean water and sewage), the medium temperature is ≤ 80 ℃, and the maximum water head is ≤ 10m, the intersection kiln shaft, sand settling tank, sedimentation tank, diversion channel, pump station intake and clean water well, etc., so as to realize the flow and liquid level control. It is one of the important equipment for water supply and drainage and sewage treatment. Wall type penstocks is used in inlet and outlet of wall for open or close, and use anchor bolts to fix the penstock to the hole surface.

Main parameters

1.Diameter:  200x200-4000x4000mm 2.Size range:200x200-4000x4000mm
3.Pressure: 1M-10M water head 4.Medium: water,sewage 5.Tem: ≤80℃
6. End connection: A:Anchor bolt installation B:Cement pouring
Material of main parts
Body material
Stainless steel
Disc material
Stainless steel
Stem material
SS420
Sealing material
EPDM/ NBR

stainless steel manual operation wall type penstock gate Related Video: